Created with Sketch. Created with Sketch.

Shop by Category

Wheel Mounting Cups, Cones, Accy

 
  • SALE

    Medium Truck Kit for 40mm shaft

    ProblemSolver!  Medium truck wheel mounting kit for balancers with a 40mm shaft. Includes SPACER RING and LARGE CONE. The spacer ring allows the mounting of "offset wheels" found on trucks with dual rear wheels. The cone size covers 4.72" - 6.85"...

    Was: $298.00
    Now: $227.18
    Add to Cart
  • 3 CONE SET for 40mm shaft

    3 PIECE CENTERING CONE SET for Wheel Balancers with a 40mm diameter shaft. Covers 1.65" - 4.39" (42mm - 111.5mm) center holes. Cones (except the smallest one) have a lip on the small side to keep wheel from dropping on shaft while mounting and...

    $145.16
    Add to Cart
  • 4 CONE SET for 40mm shaft. 20-1167-1

    4 PIECE CENTERING CONE SET for Wheel Balancers with a 40mm diameter shaft. Covers 1.65" - 5.20" (42mm - 132mm) center holes. Cones (all except the smallest one) have a lip to help prevent wheel from dropping onto the shaft while mounting and demounting...

    $298.00
    Add to Cart
  • CALIPERS, Wheel Measuring. WB309011

    Wheel Measuring CALIPERS for all brands of Wheel Balancers. Used for measuring the RIM WIDTH which is a required input on many balancers. OEM / Aftermarket Interchanges: WB309011, 309011, 8309011, 110007, FMC 61123.

    $49.80
    Add to Cart
  • Centering CONE 1.65 for 40mm shaft

    Centering CONE for Wheel Balancing, 1.65"-2.54" (42mm-64.5mm) for 40mm shaft.Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420, 1450,...

    $61.00
    Add to Cart
  • Centering CONE 1.75 for 40mm shaft.

    Centering CONE for Wheel Balancing, 1.75 to 2.58" (45mm - 65mm) for 40mm shaft.   Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420,...

    $58.40
    Add to Cart
  • Centering CONE 2.12 for 40mm shaft

    Centering CONE for Wheel Balancing, 2.12"-3.13" (54mm-79.5mm) for 40mm shaft.   Should fit the following brands / models: Models in RED may have multiple shaft sizes - confirm a 40mm diameter shaft.AccuTurn: 1200, 1220, 1250, 1400, 1420, 1450,...

    $86.53
    Add to Cart